SERVER and RAID Solution in one Cabinet!: The main issue is to
                               reduce the risk of overlog SCSI cable using. It will improve the quality
                               of transmission. To lessen the complex external cable when system
                               connects with subsystem. 
                               Small but complete system center: OA-400 has not only mass
                               storage space but also built in all electrical connection, including dual
                               320Wx2 redundand power module(Optional: Dual 400Wx2). It will be
                               able to share the AC power source to other device or to do inspection
                               by multiple wire plug in. OA-400 is a well equipped storage unit ready
                               for any kind of configuration. 
                               Well ergonomics design, more operating space: Two arrays of
                               HDD holders are able to swing horizontally to provide bigger room for
                               the user. The top layer is served as the mainboard holder, it allows
                               easy access for assembly and maintenance. 
                               Simple, clear, neat and uniform design: Locking front door with
                               plexiglass bezel for viewing drives, multiple air ventilator will increase
                               the air flow 
                    
Internal structure:  

1. Exposed storage bays: 22 x 5 1/4" +1 x 3 1/2" h.d.d holder. 
Main board size: Full AT from 12 to 16 slots (Compatible with AMI/Micronics m/b) ATX Form Factor (Intel/ Asus/Super Micro/ Micronics...)  ATX Form Factor w/ AGP slot (Super Micro)  Passive Backplane from 12 to 16 slots  Options: ATX I/O sheet: 1. Marl w/o USB 

2. Venus 

3. Marl w/ USB 

4. Providence 

3. Control panel: Led: M/b power/ Power failure x2/ h.d.d active x 20/  ps-on / Ac power led / fan failure led (reserving). Switch: ps-on/ reset/ fan x 2 /power alarm stop x 2 switch. Control Panel: System thermometer and +5V / +12V voltmeter.  

4. Power Supply: Standard: Dual 300wx2 Redundant Power Module (300wx2x2) Options : Dual 400wx2 Redundant Power Module (400wx2x2) 

5. I/O port: 68pin x 4 / 50pin x 4 / 9pin x2 / ID port x 2 / 15pin x 2/ 25pin x2 reserving space for 6 x 5o led and extra cooling fan (9cmx2).  

6. Cooling Fan : 4 x 9 cm ball bearing fan (fan module be settled between left and right h.d.d. holder) 2 x 12cm ball bearing fan ( back door) options: 2 x 9cm ball bearing fan (backpanel) 

Optional accessories: 

a. H.d.d. cooling holder, including: 4cm x 2 ball bearing fan. 
b. SCSI Canister: SI-125SD for 50pin fast SCSI canister SI-125WS for 68pin fast & wide SCSI canister SI-146WS for 68pin fast & wide SCSI canister w/ dual cooling fan SI-145WS for 68pin fast & wide SCSI canister w/ SAF-TE  
c. thermo and fan detector 
 
 

Model no.	M/B Size		Redundant Power Supply
OA-400 AT	Full AT		300w x 2 x 2 AT
OA-400 ATX	ATX		300w x 2 x 2 ATX
OA-400 AT	Full AT		400w x 2 x 2 AT
OA-400 ATX	ATX		400w x 2 x 2 ATX

 

Power Module	Power output				Order no.
300wX 2 AT	+5A/60A,+12V/24A/set				HRP-102 AT
	-5V/ 1A , -12V/ 1A
300wX 2 ATX	+5V/60A,+12V/18A,+3.3V/20A/set				HRP-102 ATX
	-5V/ 1A , -12V/ 1A, SBV:+5V:0.75A
400wX 2 AT	+5A/42A,+12V/14A/ per power unit				RPP-400WX2
	-5V/ 1A , -12V/ 1A
400wX 2 ATX	+5A/42A,+12V/14A,+3.3V/20A/per unit				RPP-400WX2
	-5V/ 1A , -12V/ 1A, SBV:+5V:0.75A

 

More Operating Space. 

Two arrays of h.d.d. holders are able to swing horizontally to provide bigger room for for the user The top layer is served as the mainboard holder, it allow easy access for  assembly and maintance. 

Simple, clear, neat and uniform design 

Locking front door with plexiglass bezel for viewing drives, Mutiple air ventilator will increase the air flow.