Disclaimer
This information is supplied freely although if you use it or give it to somebody else
it must be done in an unaltered way. If you build your own card, and there is
equipment failure I CAN NOT be held responsible. You use this information at
your own risk. If you do anything wrong, you risk your project, your sound card
and maybe even your computer. This isn't a project for first timers in PCB making.
If there is something in this text you dont understand, then you probably shouldn't
build it yourself. Well, now when that has been taken care of I'll get on to the point.

1. Overview
2. Required equipment
3. Layout's
4. The Making
5. The Finished Card
 

1. This is a short explanation how to make your own optical output for
    the Creative SB Live Value sound card. It requires Soldering skills and
    for this version also Equipment and knowledge for making PCB board's.

2. First you need a Soldering Iron, or station, Preferably with a fine tip.
    You will need etching equipment to take away the copper from the PCB.
    You also need a UV-Exposer and what goes with that.
    Components. (In Sketch)

3. The pictures below are in this order.
   1. Layout of all layers seen from topside.
   2. Topside Layout
   3. Bottom side Layout.
   4. Sketch
   (All these are 300dpi, JPGs except for Sketch)

Image 3.1            Image 3.2                     Image 3.3                      Image 3.4
             
(130Kb)              (78KB)                       (84KB)                          (18KB GIF)

4. All layout work has been done in Eagle .
    And drilling and Soldering has been done by hand using an ordinairy
    30 000 rpm drill tower and Soldering station.
    All components have been bought from ELFA .

5. Pictures below are in this order.
    1. Top
    2. Bottom
    3. Front
    4. Cable

Image 5.1            Image 5.2           Image 5.3                      Image 5.4
             
(35KB)               (41KB)               (16KB)                         (40KB)
 

Peter Werner 2000